When spray foam has to come out before a mortgage survey, a sale, or a loft refit, 24/7 Spray Foam Removal in Bridgwater gets it done without waiting for office hours. We cover lofts, roofs, cavity walls and timber frames across Somerset, arriving with dry ice blasting rigs, industrial vacuum extraction and air scrubbers. Call at 2am and we answer. Call on a Sunday and we book you in.
24/7 Spray Foam Removal in Bridgwater is the out-of-hours stripping of open cell spray foam, closed cell spray foam and polyurethane foam from lofts, roof timbers, cavity walls and rafters, carried out at any hour you need it. We cut the foam back with oscillating multi-tools and reciprocating saws, blast the residue off roof timber with dry ice blasting machines, and pull the dust out with industrial vacuum extraction units and air scrubbers. A boroscope inspection camera and thermal imaging camera confirm the timber is clean before we leave.
Bridgwater homeowners call us for one reason more than any other: a surveyor flagged spray foam insulation and the mortgage lender will not proceed until it is gone. Others ring because trapped moisture has started roof timber rot, or because loft ventilation blockage has turned the loft damp. We run 24 hour spray foam removal Bridgwater-wide, so a lender's deadline or a Friday-night panic does not push you into next week. If you have searched 24/7 spray foam removal near me Bridgwater and found nobody who picks up, that is what we built this service around.
Every 24/7 spray foam removal job includes the full strip, containment, verification and paperwork. Add-ons like timber treatment, replacement insulation and cavity clearance are quoted separately once we have seen the loft, and we tell you before we start rather than after.
Removal of open cell spray foam, closed cell spray foam and polyurethane foam from rafters, roof decks and cavity walls, using oscillating multi-tools, reciprocating saws and dry ice blasting machines. We strip back to bare timber, not just to a thin skin of foam.
Zip-door hatch sealing, protective sheeting, a negative air machine and air scrubber running throughout, plus an industrial vacuum extraction unit at the cutting head. On a standard loft this keeps dust out of the living space almost entirely.
Every rafter bay checked with a boroscope inspection camera, moisture meter and thermal imaging camera. We record readings before and after, and flag any structural timber decay or early rot that needs treating before the roof is closed up.
Where foam has blocked loft ventilation, we clear the eaves paths and fit a breathable membrane so the roof can dry. This is the step that stops condensation and damp from spray foam returning the following winter.
Before-and-after photographs, moisture meter readings and a written method statement, handed over the same visit. This is the paperwork most UK lenders and valuers ask for when spray foam has triggered a mortgage refusal.
You ring 0127 827 6038 and speak to a person, not a menu. We ask what the foam is on, roughly how many square metres, and whether a lender or surveyor is involved. Within ten minutes you get a fixed price range and an arrival window, day or night.
On arrival we run a boroscope inspection camera into the rafter bays and take moisture meter readings across the loft. A thermal imaging camera shows us where the foam is hiding damp. This takes 20 to 30 minutes and tells us whether we are dealing with open cell or closed cell spray foam.
We lay protective sheeting, seal the hatch with a zip door, and position a negative air machine and air scrubber to keep the rest of the house clean. PPE disposable coveralls and respirator filters go on before any cutting starts. Setup is usually 15 minutes.
Foam comes off with oscillating multi-tools and reciprocating saws, then dry ice blasting machines lift the residue from the roof timber without gouging the wood. A hammer drill handles fixings, and an industrial vacuum extraction unit runs at the cutting head throughout. A 40 square metre loft takes four to six hours.
We re-check every bay with the moisture meter and thermal imaging camera, photograph the clean timbers, and fit a breathable membrane where ventilation was blocked. You get the photo pack, readings and a written summary the same visit. Most lenders accept that paperwork without a second inspection.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Lifts foam residue off roof timber using frozen CO2 pellets. No abrasive media, no gouging, and nothing left behind to sweep up afterwards.
Softens dense closed cell foam so it peels off rafters in sheets. Slower than blasting but far gentler on older, softer timber.
Runs at the cutting head to capture foam dust and debris at source. Keeps the loft and the rest of the house clean during the strip.
Maintains negative pressure in the loft so airborne dust cannot migrate into living spaces. Essential on overnight jobs where the family is asleep downstairs.
Lets us see into rafter bays, eaves and behind purlins without pulling the roof apart. Confirms whether foam has reached hidden timbers.
Records timber moisture content and finds hidden damp before and after the strip. The readings go into the lender photo pack.
Cuts foam back cleanly around rafters, fixings and services without damaging the timber or the wiring running alongside it.
A Bridgwater Town Centre homeowner had a mortgage frozen after a surveyor flagged open cell foam across a 38 square metre loft. The rafters were reading 23% moisture and the lender wanted evidence before releasing funds. Exchange was five days away.
We stripped the foam overnight with dry ice blasting, cleared the blocked eaves ventilation and fitted a breathable membrane. Moisture readings dropped to 15% within three weeks, and the valuer signed off on the photo pack alone. The sale completed on the original date.
A Wembdon landlord had a tenant reporting damp patches on a bedroom ceiling for two winters running. Three contractors had looked and none had found the cause. The loft had closed cell foam sprayed across the roof deck with no ventilation path at all.
We traced the problem with a thermal imaging camera, confirmed the foam was trapping moisture, and stripped 42 square metres of closed cell foam using thermal blasting. Ventilation was reinstated and a breathable membrane fitted. The ceiling dried out in under two weeks.
A Stockmoor Village family wanted to convert their loft but the existing closed cell foam had to come out first. The builder could not start until the timbers were bare and dry, and the family could not move out during the work.
We ran an overnight strip, removing 30 square metres of dense closed cell foam with thermal blasting and extraction. The family slept through it and found no visible dust the next morning. Timbers were bare, dry and ready, and the conversion started on schedule.
Most of our 24/7 call-outs come down to one of four problems. All of them get worse the longer they are left, and all of them are fixable in a single visit once we are on site.
Ask a pro →We strip the foam, photograph the clean timbers and supply the moisture readings and method statement lenders ask for. Most Bridgwater clients get their valuation signed off within a week of our visit, and we can attend at short notice when a completion date is at risk.
We remove the foam, check every bay with a moisture meter and thermal imaging camera, and treat any early rot before it spreads. On most jobs the timber dries back below 16% within two to three weeks once ventilation is reinstated.
We clear the blocked ventilation paths, strip the foam that is causing the problem, and fit a breathable membrane so the roof can breathe. Clients in Stockmoor Village and Hamp typically see loft humidity drop within a fortnight.
Our photo pack and written summary give insurers and surveyors the evidence they need that the foam is gone and the roof structure is sound. We have helped Bridgwater homeowners get standard cover reinstated after a single visit.
Yes. Our phone line is staffed every hour of every day, and we run crews overnight, at weekends and on bank holidays across Bridgwater and Somerset. A typical out-of-hours call is answered in under a minute, and we can usually have a two-man team on site within 90 minutes. There is no premium for the hour itself, only for the size and access of the job.
You can. Emergency spray foam removal Bridgwater 24/7 covers genuine night call-outs, most often the night before a lender's deadline or when a surveyor has just flagged foam and a sale is at risk. We arrive with lighting rigs, dry ice blasting machines and extraction units, and we work quietly enough that neighbours are not disturbed. Most night jobs finish before dawn.
There is no hourly night surcharge. Pricing is based on square metres of foam, foam type and access, not the clock. A standard 40 square metre open cell loft runs £1,400 to £2,600 in 2026 whether we start at 10am or 2am. Closed cell foam, deep timber rot or restricted loft access add to the total, and we confirm the figure before we start.
Ring 0127 827 6038 at any hour and you will speak to a person. Tell us the postcode, roughly how many square metres of foam there are, and whether a lender or surveyor is involved. We give you a fixed price range and an arrival window on that call, then confirm everything in a text before the crew sets off. Email and web enquiries are answered within two hours, day or night.
Spray Foam Removal near meIf you have searched spray foam removal near me Bridgwater, this is the same crew and the same kit, just booked at a normal hour. We cover every Bridgwater postcode and the surrounding villages, with the same dry ice blasting and extraction setup we use on night jobs.Explore →
Same day Spray Foam RemovalSame day spray foam removal is often the practical answer when a lender's deadline is tight. Ring before 2pm and we can usually be on site the same afternoon, or overnight if that suits you better. We carry enough extraction and blasting equipment on the van for a standard loft.Explore →
Residential Spray Foam RemovalMost of our 24/7 call-outs are residential: lofts, dormers, bungalow roofs and cavity walls in Bridgwater homes. We work around sleeping children, pets and shift workers, and we keep the dust contained with negative air machines so the rest of the house stays usable.Explore →
Commercial Spray Foam RemovalCommercial spray foam removal for Bridgwater warehouses, workshops and retail units is usually scheduled overnight so trading is not interrupted. We can strip large roof areas in a single night shift with multiple crews, thermal blasting rigs and industrial vacuum extraction units.Explore →
Loft Spray Foam RemovalLoft spray foam removal is the single most common job we do in Bridgwater. Whether it is open cell sprayed between rafters or closed cell foam on the underside of a roof deck, we strip it, check the timbers with a moisture meter, and reinstate ventilation with a breathable membrane.Explore →
Roof Spray Foam RemovalRoof spray foam removal often means working at height on Bridgwater's older pitched roofs. We use roof ladders, edge protection and dry ice blasting to lift foam from rafters and sarking without damaging the timber, then photograph the clean roof structure for your lender or surveyor.Explore →
Attic Spray Foam RemovalAttic spray foam removal covers the tighter, awkward spaces where a standard loft crew cannot stand up. We use oscillating multi-tools, boroscope inspection cameras and compact extraction hoses to reach foam in eaves and behind purlins, day or night.Explore →
Spray Foam Insulation RemovalSpray foam insulation removal is the umbrella job: taking out polyurethane foam, loft insulation and cavity wall insulation that has failed, trapped moisture or been flagged by a surveyor. We assess, strip, verify with thermal imaging and hand over the paperwork in one visit.Explore →We answer the phone at any hour, give you a fixed price range on the call, and can be on site within 90 minutes across Bridgwater and Somerset. CHAS accredited, fully insured, and used to working around sleeping households. Ring now and we will tell you exactly what the job involves.
Call Our 24/7 Line 0127 827 6038 →Call 0127 827 6038 or email us and a technician will get back to you the same working day. We answer the phone from 8am to 6pm Monday to Friday, and our emergency line is staffed 24/7 for urgent foam problems. Free surveys across Bridgwater and the surrounding villages, usually booked within two working days.